M0 joystick: small, durable & reliable

The M0 mini joystick is designed for digital applications with up to 5-0-5 step output and / or analogue applications with stepless output using potentiometers.

Micro-switches, double contacts or analogue sensors are installed with modular double contacts on the drive block. This block is made of durable PA6 GF30 plastic. The drive block is resistant to ozone, UV radiation, oil and maritime climate.

Despite a limited installation depth, Spohn & Burkhardt offers both a single drive and compound drive with spring-return. When equipped with micro-switches, the MO joystick can also be used with operating voltages of up to 230 VAC.

In order to increase the device’s stability, a high metal handle shaft is provided. Installation of a pushbutton in the handle is possible.

An X-Y connecting link is available in addition to the standard connecting link for handle deflection of up to 26 degrees. With a relatively low weight and small dimensions, the MO joystick is a great solution for installation in portable panels and as a control switch for auxiliary functions.

Number of axis 1 or 2 axis
Max. handle deflection 28°
Cross gate yes
Special gate yes
Max. protection class outside / inside IP54 / IP00
Installation from below
Number of notches 5
Spring return yes
Friction break yes
Mechanical Interlock yes
Operating temperature -20°C / +60°C
Switching cycles Min. 5 milion
Switching capacity 24V / 7A
Max. Voltage / Current 230V / 6A
Max. number of contacts per direction of movement 8
Sensor types Potentiometer, Hall sensor

Type of desired output signals

4-20 mA or 0-20 mA
-10 .... +10 volt DC
-2,5 .... + 2,5 volt DC
0 .... +5 volt DC (digital)
-10 .... +10 volt DC pp (PWM)
0 .... +5 volt DC pp (PWM)

Analogue output resistance