Slip ring collector consisting of rings coupled with brushes, designed to allow current to pass from a fixed to a rotating part and used to supply crane motors and cable winders.

Features - Suitable for transmitting current with 50/60 Hz frequency. - The enclosure has small downward holes for air circulation and to prevent problems due to moisture. - The lower support plate is provided with three holes to drain any moisture that may form inside the unit. - The enclosure is made of shock-resistant thermoplastic material to prevent contact with live electrical parts. - IP protection degree: collector 10A/30A is classified IP22. - Extreme temperature resistance: -25°C to +70°C.

Options - Up to 40 rings coupled with brushes. - Available with 30A line rings only or with 30A line rings and 10A auxiliary rings. - Fitted with phosphor bronze or graphite brushes.

Certifications - CE marking and EAC certification.

Conformity to Community Directives2014/35/UE 2006/42/CE 
Conformity to StandardsEN 60204-1 EN 60309-1 EN 60529 
Storage ambient temperature-40°C/+70°C
Operational ambient temperature-25°C/+70°C
Protection degreeIP 22
Insulation categoryClass I
Cable entrycable clamps M20 - M25
Operating positionsany position
Markings and homologationsCE EAC