Slip ring collector consisting of rings coupled with brushes, designed to allow current to pass from a fixed to a rotating part and used to supply crane motors and cable winders.
Features - Suitable for transmitting current with 50/60 Hz supply frequency. - The enclosure has small downward holes for air circulation and to prevent problems due to moisture. - The lower support plate is provided with three holes to drain any moisture that may form inside the unit. - The enclosure is made of shock-resistant thermoplastic material to prevent contact with live electrical parts. - Fitted with phosphor bronze brushes. - IP protection degree: collector 50A is classified IP22. - Extreme temperature resistance: -25°C to +70°C.
Options - Up to sixteen 50A line rings coupled with brushes.
Certifications - CE marking and EAC certification.
|Conformity to Community Directives||2014/35/UE 2006/42/CE|
|Conformity to Standards||EN 60204-1 EN 60309-1 EN 60529|
|Storage ambient temperature||-40°C/+70°C|
|Operational ambient temperature||-25°C/+70°C|
|Protection degree||IP 22|
|Insulation category||Class I|
|Cable entry||cable clamps M20 - M25|
|Operating positions||any position|