Slipring collector 10/30A with 4xM20 cable entry, 8x10A and 4x30A rings

10A/30A Slip Ring Collector

10A/30A slip ring collector from TER consist of rings coupled with brushes, designed to allow current to pass from a fixed to a rotating part and used to supply crane motors and cable winders.

Features 10A/30A Slip Ring

- Suitable for transmitting currents with 50/60 Hz frequency
- The enclosure has small downward holes for air circulation and to prevent problems due to moisture.
- The lower support plate is provided with three holes to drain any moisture that may form inside the unit.
- The enclosure is made of shock-resistant thermoplastic material to prevent contact with live electrical parts.
- IP protection degree: collector 10A/30A is classified IP22.
- Extreme temperature resistance: -25℃ to +70℃.
- Storage ambient temperature: -40℃/+70℃
- Protection degree: IP 22
- Insulation category: Class I
- Cable entry: cable clamps M20 - M25
- Operating positions: any position

Certifications, Markings, Homologations

- Conformity to Community Directives: 2014/35/UE 2006/42/CE
- Conformity to Standards: EN 60204-1 EN 60309-1 EN 60529
- CE / EAC

Electrical Specifications

- Rated operational current: 10 A - 30 A
- Rated operational voltage: 400 Vac
- Rated insulation voltage: 660 Vac
- Max. speed: 3 rev./min
- Connections: clamps with Ø 4 mm hole clamps with M4 screw accepting eyelet terminals

Options

- Up to 40 rings coupled with brushes.
- Available with 30A line rings only or with 30A line rings and 10A auxiliary rings.
- Fitted with phosphor bronze or graphite brushes.